Return to site

Hiro Wireless Adapter Drivers

broken image


Network Adapter is the main part of any computer, specially for the users who use internet regularly. As other things network adapters may also fail to work properly due to some reasons, specially new users can face some problems with their network adapter due to the lack of sufficient knowledge about it. Sometimes when your internet connection is not working properly, this may be due to the problems with your network adapter ( usually when you have Dial up connection ). So make sure to check your network adapter when your internet is not working fine. Today we are going to tell you about things to do when network adapter is not working properly, which are mentioned below.

HiRO HiRO H50334 D Band WiFi WLAN USB Network. ASUS AX3000 PCE-AX58BT WiFi 6 Dual Band PCIe Wireless Adapter w/. Wanted to give my desktop PC some wireless, so I picked up the ASUS AC1300 Dual-Band Wireless Adapter. The price tag on the dual-band wireless adapter was ve.

1: Enable DHCP:

This is the main problem which don't allow network adapter to work properly. The latest network adapters automatically enable DHCP when the computer starts. But sometimes wireless network adapters ( these are usually USB attached adapter from Tenda or other companies ) do not work properly if you haven't enabled DHCP. To enable DHCP follow these steps.

Start > Control Panel > Network and Internet Connections > Network Connections > Right click on network connection for which you want to enable DHCP > Properties > Internet protocol TCP/IP (or related ) > Click on 'Obtain IP address automatically' > Click on 'Obtain DNS addresses automatically' > OK.

Now DHCP is enabled, the whole process is shown in the screenshot below for easy understanding.

2: Restart your computer:

After enabling DHCP, if your network connection is still not working properly then restart your computer. Because sometimes restarting computer can solve the issue. Restarting computer allows the 'attached accessories ( Network adapter in our case )' to fix the problem itself.

Hiro wireless adapter drivers for pc
Hiro wireless adapter drivers

3: Plug-out and Plug-In again:

If network adapter is still not working properly, then there is another choice for you. Turn off your computer and then open the case, plug out the network adapter and then after cleaning it plug in again and then check it ( in PC its easier but if you have Laptop then it could take some time but not more then 5 minutes ).

4: Check other things too:

Sometimes your network adapter might be working properly, so you should check other things too. For example modem and wire attached to it ( if you have wired connection ), check router too ( if you are using wireless network ).

5: If its still not working replace it:

If network adapter is damaged a lot or if its still not working properly then you should replace it as early as possible to continue your work. You can also buy network adapters online. Below we have recommended some, which are good quality and affordable.

Know the best about Things to do if network adapter is not working properly:

So, these are some valuable things to do when your network adapter is not working properly. Among all of these tips, enabling DHCP is most important because its a very common problem with network adapters. Others things like restarting your computer and changing the network adapter may also work. We hope you will like the stuff but stay in touch with us because there is coming more.

HiRO Dual Band 11ac AC600 433Mbps Wireless USB Windows 10 Plug n Play (R)

Usb


MFG Refurbished, adapter only, Windows 10 plug n play. Driver available for download directly from MFG's website, http://www.hiroinc.com/drivers/H50334%20H50335/


HiRO H50334 Dual Band 802.11ac 11ac AC600 5G 433Mbps Wireless WiFi WLAN USB Network Adapter Windows 10 plug n play no driver installation needed Windows 8.1 8 7 Compatible


HiRO H50334 Dual Band 802.11ac 11ac AC600 5G 433Mbps Wireless WiFi WLAN USB Network Adapter Windows 10 plug n play no driver installation needed Windows 8.1 8 7 Compatible

HiRO H50334 Dual Band 802.11ac 11ac AC600 5G 433Mbps Wireless WiFi WLAN USB Network Adapter connects up to 433Mbps under 5G network. It offers the easiest way to get connected under Windows 10. Simply plug it into an USB port and the driver will be found and automatically installed, period. Connected to your AP/Router instantly after entering password with superior signal strength and link quality.
HiRO - Your Reliable Connection!!

Features
Dual Band 802.11ac 11ac AC600 - Connects up to 433Mbps at 5G providing high speed data transmission for video streaming and online gaming.

Windows 10 Plug n Play - Simply plug it into USB port and driver will be installed automatically

Stable and Reliable - Easy to config to any wireless network 2.4GHz or 5GHz, providing stable and reliable connection, no lag, no delay, no trouble.


Support USB 2.0
Support 20MHz/40MHz/80MHz frequency
5G compatible with IEEE 802.11ac and IEEE 802.11a standard
2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standard
Detect the network and change transmit speed automatically
Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption
Support WPS 2.0
Internal Omni-directional Antenna
Support 2.4G and 5G dual band
Support Wi-Fi Direct
Support Multiple BSSID
Support QoS-WMM, WMM-PS
Support WPS: PIN
Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes
Supported OS: Window 10 8.1 8 7

Specifications
Wireless Standards
IEEE 802.11n
IEEE 802.11g
IEEE 802.11b
IEEE 802.11ac
IEEE 802.11a

Transmit Speed
802.11b: 1/2/5.5/11Mbps
802.11g: 6/9/12/18/24/36/48/54Mbps
802.11n: up to 150Mbps
802.11ac: up to 433Mbps

Frequency Range
2.412~2.4835 GHz
5.180~5.320GHz
5.500~5.700GHz
5.745~5.825GHz

Work Channel
1 ~ 14 (2.4G)
36 ~ 165 (5G)

Work Power
18dBm (Typical)

Sensitivity
11n: -68dBm@130M; -68dBm@108M
11g: -69dBm@54M
11b: -85dBm@11M
11ac: -59dBm@433M

Asrock am2nf6g vsta lan drivers for mac. Wireless Security
WPA/WPA2/WPA-WPA2/802.1x
64/128 bit WEP
WPS (PIN)

H50334

3: Plug-out and Plug-In again:

If network adapter is still not working properly, then there is another choice for you. Turn off your computer and then open the case, plug out the network adapter and then after cleaning it plug in again and then check it ( in PC its easier but if you have Laptop then it could take some time but not more then 5 minutes ).

4: Check other things too:

Sometimes your network adapter might be working properly, so you should check other things too. For example modem and wire attached to it ( if you have wired connection ), check router too ( if you are using wireless network ).

5: If its still not working replace it:

If network adapter is damaged a lot or if its still not working properly then you should replace it as early as possible to continue your work. You can also buy network adapters online. Below we have recommended some, which are good quality and affordable.

Know the best about Things to do if network adapter is not working properly:

So, these are some valuable things to do when your network adapter is not working properly. Among all of these tips, enabling DHCP is most important because its a very common problem with network adapters. Others things like restarting your computer and changing the network adapter may also work. We hope you will like the stuff but stay in touch with us because there is coming more.

HiRO Dual Band 11ac AC600 433Mbps Wireless USB Windows 10 Plug n Play (R)


MFG Refurbished, adapter only, Windows 10 plug n play. Driver available for download directly from MFG's website, http://www.hiroinc.com/drivers/H50334%20H50335/


HiRO H50334 Dual Band 802.11ac 11ac AC600 5G 433Mbps Wireless WiFi WLAN USB Network Adapter Windows 10 plug n play no driver installation needed Windows 8.1 8 7 Compatible


HiRO H50334 Dual Band 802.11ac 11ac AC600 5G 433Mbps Wireless WiFi WLAN USB Network Adapter Windows 10 plug n play no driver installation needed Windows 8.1 8 7 Compatible

HiRO H50334 Dual Band 802.11ac 11ac AC600 5G 433Mbps Wireless WiFi WLAN USB Network Adapter connects up to 433Mbps under 5G network. It offers the easiest way to get connected under Windows 10. Simply plug it into an USB port and the driver will be found and automatically installed, period. Connected to your AP/Router instantly after entering password with superior signal strength and link quality.
HiRO - Your Reliable Connection!!

Features
Dual Band 802.11ac 11ac AC600 - Connects up to 433Mbps at 5G providing high speed data transmission for video streaming and online gaming.

Windows 10 Plug n Play - Simply plug it into USB port and driver will be installed automatically

Stable and Reliable - Easy to config to any wireless network 2.4GHz or 5GHz, providing stable and reliable connection, no lag, no delay, no trouble.


Support USB 2.0
Support 20MHz/40MHz/80MHz frequency
5G compatible with IEEE 802.11ac and IEEE 802.11a standard
2.4G compatible with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standard
Detect the network and change transmit speed automatically
Support WPA/WPA2/WPA-WPA2/802.1x and 64/128 bit WEP encryption
Support WPS 2.0
Internal Omni-directional Antenna
Support 2.4G and 5G dual band
Support Wi-Fi Direct
Support Multiple BSSID
Support QoS-WMM, WMM-PS
Support WPS: PIN
Support Infrastructure mode, Ad-Hoc mode and Soft AP three modes
Supported OS: Window 10 8.1 8 7

Specifications
Wireless Standards
IEEE 802.11n
IEEE 802.11g
IEEE 802.11b
IEEE 802.11ac
IEEE 802.11a

Transmit Speed
802.11b: 1/2/5.5/11Mbps
802.11g: 6/9/12/18/24/36/48/54Mbps
802.11n: up to 150Mbps
802.11ac: up to 433Mbps

Frequency Range
2.412~2.4835 GHz
5.180~5.320GHz
5.500~5.700GHz
5.745~5.825GHz

Work Channel
1 ~ 14 (2.4G)
36 ~ 165 (5G)

Work Power
18dBm (Typical)

Sensitivity
11n: -68dBm@130M; -68dBm@108M
11g: -69dBm@54M
11b: -85dBm@11M
11ac: -59dBm@433M

Asrock am2nf6g vsta lan drivers for mac. Wireless Security
WPA/WPA2/WPA-WPA2/802.1x
64/128 bit WEP
WPS (PIN)

Support Operation System
Window 10 8.1 8 7

Host Interface USB 2.0
LED Link/Act
Antenna Type Internal Omni-directional Antenna

Hiro Wireless Adapter Drivers

Environment
Operating Temperature: 0℃ ~45℃
Storage Temperature: -20℃ ~75℃
Operating Humidity: 10% ~ 90% RH (Non Condensing)
Storage Humidity: 5% ~ 95% RH (Non Condensing)

Hiro Wireless Adapter Drivers For Windows 10

For more information, click [view offer] to the right side.





broken image